Convolutional Neural Networks¶
Project: Write an Algorithm for a Dog Identification App¶
In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with '(IMPLEMENTATION)' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section, and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!
Note: Once you have completed all of the code implementations, you need to finalize your work by exporting the iPython Notebook as an HTML document. Before exporting the notebook to html, all of the code cells need to have been run so that reviewers can see the final implementation and output. You can then export the notebook by using the menu above and navigating to \n", "File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.
In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.
Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. Markdown cells can be edited by double-clicking the cell to enter edit mode.
The rubric contains optional "Stand Out Suggestions" for enhancing the project beyond the minimum requirements. If you decide to pursue the "Stand Out Suggestions", you should include the code in this IPython notebook.
Why We're Here¶
In this notebook, you will make the first steps towards developing an algorithm that could be used as part of a mobile or web app. At the end of this project, your code will accept any user-supplied image as input. If a dog is detected in the image, it will provide an estimate of the dog's breed. If a human is detected, it will provide an estimate of the dog breed that is most resembling. The image below displays potential sample output of your finished project (... but we expect that each student's algorithm will behave differently!).
In this real-world setting, you will need to piece together a series of models to perform different tasks; for instance, the algorithm that detects humans in an image will be different from the CNN that infers dog breed. There are many points of possible failure, and no perfect algorithm exists. Your imperfect solution will nonetheless create a fun user experience!
The Road Ahead¶
We break the notebook into separate steps. Feel free to use the links below to navigate the notebook.
- Step 0: Import Datasets
- Step 1: Detect Humans
- Step 2: Detect Dogs
- Step 3: Create a CNN to Classify Dog Breeds (from Scratch)
- Step 4: Use a CNN to Classify Dog Breeds (using Transfer Learning)
- Step 5: Create a CNN to Classify Dog Breeds (using Transfer Learning)
- Step 6: Write your Algorithm
- Step 7: Test Your Algorithm
Step 0: Import Datasets¶
Import Dog Dataset¶
In the code cell below, we import a dataset of dog images. We populate a few variables through the use of the load_files function from the scikit-learn library:
train_files,valid_files,test_files- numpy arrays containing file paths to imagestrain_targets,valid_targets,test_targets- numpy arrays containing onehot-encoded classification labelsdog_names- list of string-valued dog breed names for translating labels
from sklearn.datasets import load_files
from keras.utils import np_utils
import numpy as np
from glob import glob
# define function to load train, test, and validation datasets
def load_dataset(path):
data = load_files(path)
dog_files = np.array(data['filenames'])
dog_targets = np_utils.to_categorical(np.array(data['target']), 133)
return dog_files, dog_targets
# load train, test, and validation datasets
train_files, train_targets = load_dataset('/data/dog_images/train')
valid_files, valid_targets = load_dataset('/data/dog_images/valid')
test_files, test_targets = load_dataset('/data/dog_images/test')
# load list of dog names
dog_names = [item[20:-1] for item in sorted(glob("/data/dog_images/train/*/"))]
# print statistics about the dataset
print('There are %d total dog categories.' % len(dog_names))
print('There are %s total dog images.\n' % len(np.hstack([train_files, valid_files, test_files])))
print('There are %d training dog images.' % len(train_files))
print('There are %d validation dog images.' % len(valid_files))
print('There are %d test dog images.'% len(test_files))
Import Human Dataset¶
In the code cell below, we import a dataset of human images, where the file paths are stored in the numpy array human_files.
import random
random.seed(8675309)
# load filenames in shuffled human dataset
human_files = np.array(glob("/data/lfw/*/*"))
random.shuffle(human_files)
# print statistics about the dataset
print('There are %d total human images.' % len(human_files))
Step 1: Detect Humans¶
We use OpenCV's implementation of Haar feature-based cascade classifiers to detect human faces in images. OpenCV provides many pre-trained face detectors, stored as XML files on github. We have downloaded one of these detectors and stored it in the haarcascades directory.
In the next code cell, we demonstrate how to use this detector to find human faces in a sample image.
import cv2
import matplotlib.pyplot as plt
%matplotlib inline
# extract pre-trained face detector
face_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')
# load color (BGR) image
img = cv2.imread(human_files[3])
# convert BGR image to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# find faces in image
faces = face_cascade.detectMultiScale(gray)
# print number of faces detected in the image
print('Number of faces detected:', len(faces))
# get bounding box for each detected face
for (x,y,w,h) in faces:
# add bounding box to color image
cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)
# convert BGR image to RGB for plotting
cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)
# display the image, along with bounding box
plt.imshow(cv_rgb)
plt.show()
Before using any of the face detectors, it is standard procedure to convert the images to grayscale. The detectMultiScale function executes the classifier stored in face_cascade and takes the grayscale image as a parameter.
In the above code, faces is a numpy array of detected faces, where each row corresponds to a detected face. Each detected face is a 1D array with four entries that specifies the bounding box of the detected face. The first two entries in the array (extracted in the above code as x and y) specify the horizontal and vertical positions of the top left corner of the bounding box. The last two entries in the array (extracted here as w and h) specify the width and height of the box.
Write a Human Face Detector¶
We can use this procedure to write a function that returns True if a human face is detected in an image and False otherwise. This function, aptly named face_detector, takes a string-valued file path to an image as input and appears in the code block below.
# returns "True" if face is detected in image stored at img_path
def face_detector(img_path):
img = cv2.imread(img_path)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
faces = face_cascade.detectMultiScale(gray)
return len(faces) > 0
(IMPLEMENTATION) Assess the Human Face Detector¶
Question 1: Use the code cell below to test the performance of the face_detector function.
- What percentage of the first 100 images in
human_fileshave a detected human face? - What percentage of the first 100 images in
dog_fileshave a detected human face?
Ideally, we would like 100% of human images with a detected face and 0% of dog images with a detected face. You will see that our algorithm falls short of this goal, but still gives acceptable performance. We extract the file paths for the first 100 images from each of the datasets and store them in the numpy arrays human_files_short and dog_files_short.
Answer: You can see from the code cell below that the following results were obtained:
- Human faces detected in 100 of the human_files_short 100.00%
- Human faces detected in 11 of the dog_files_short 11.00%
The results show 100% accuracy in detecting at least one face in the first 100 files in the human_faces list. Investigating where the faces were detected in the first 100 dog_files you can see there was actually a human face in one of the pictures. This I believe is accurate and so the true percentage of mis-detected faces would be 10%. Its interesting to see in some of these mis-detections how small the highlighted area where a human face was found can be.
def face_detector_display(img_path):
img = cv2.imread(img_path)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
faces = face_cascade.detectMultiScale(gray)
# get bounding box for each detected face
for (x,y,w,h) in faces:
# add bounding box to color image
cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)
# convert BGR image to RGB for plotting
cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)
# display the image, along with bounding box
return cv_rgb
human_files_short = human_files[:100]
dog_files_short = train_files[:100]
# Do NOT modify the code above this line.
## TODO: Test the performance of the face_detector algorithm
## on the images in human_files_short and dog_files_short.
#check human_files_short
counter = 0
for image in human_files_short:
counter = counter + face_detector(image)
print ('Human faces detected in',counter, 'of the human_files_short', '{:0.2f}%'.format((counter/100)*100))
#check dog_files_short
counter = 0
humans_in_dog_files = []
for image in dog_files_short:
if face_detector(image):
humans_in_dog_files.append(image)
counter = counter + 1
#Lets see if there are any human faces in the dog pictures
print ('Human faces detected in',counter, 'of the dog_files_short', '{:0.2f}%'.format((counter/100)*100))
print ('Here are the images showing where a human face was detected')
print (humans_in_dog_files)
fig = plt.figure(figsize=(20,10))
for i in range (len(humans_in_dog_files)):
img = face_detector_display(humans_in_dog_files[i])
ax = fig.add_subplot(3, 4, i+1, xticks=[], yticks=[])
ax.imshow(img)
Question 2: This algorithmic choice necessitates that we communicate to the user that we accept human images only when they provide a clear view of a face (otherwise, we risk having unneccessarily frustrated users!). In your opinion, is this a reasonable expectation to pose on the user? If not, can you think of a way to detect humans in images that does not necessitate an image with a clearly presented face?
Answer: For this particular project I think detecting faces with a clear view is reasonable. If this was placed into an application this could be explicitly stated and would simplify the process and reduce compute overhead. The current method does consider 'scale invariance' i.e. the size of the face, so this would not be an issue, but does not consider other positioning.
For example, there could be a method to detect faces at different profile angles, possibly realigning them prior to detection. Additionaly if a face was in profile where only half the face is visible this again could require a different detection method. These additional complexities could be examined in a future project.
We suggest the face detector from OpenCV as a potential way to detect human images in your algorithm, but you are free to explore other approaches, especially approaches that make use of deep learning :). Please use the code cell below to design and test your own face detection algorithm. If you decide to pursue this optional task, report performance on each of the datasets.
## (Optional) TODO: Report the performance of another
## face detection algorithm on the LFW dataset
### Feel free to use as many code cells as needed.
Step 2: Detect Dogs¶
In this section, we use a pre-trained ResNet-50 model to detect dogs in images. Our first line of code downloads the ResNet-50 model, along with weights that have been trained on ImageNet, a very large, very popular dataset used for image classification and other vision tasks. ImageNet contains over 10 million URLs, each linking to an image containing an object from one of 1000 categories. Given an image, this pre-trained ResNet-50 model returns a prediction (derived from the available categories in ImageNet) for the object that is contained in the image.
from keras.applications.resnet50 import ResNet50
# define ResNet50 model
ResNet50_model = ResNet50(weights='imagenet')
Pre-process the Data¶
When using TensorFlow as backend, Keras CNNs require a 4D array (which we'll also refer to as a 4D tensor) as input, with shape
$$ (\text{nb_samples}, \text{rows}, \text{columns}, \text{channels}), $$where nb_samples corresponds to the total number of images (or samples), and rows, columns, and channels correspond to the number of rows, columns, and channels for each image, respectively.
The path_to_tensor function below takes a string-valued file path to a color image as input and returns a 4D tensor suitable for supplying to a Keras CNN. The function first loads the image and resizes it to a square image that is $224 \times 224$ pixels. Next, the image is converted to an array, which is then resized to a 4D tensor. In this case, since we are working with color images, each image has three channels. Likewise, since we are processing a single image (or sample), the returned tensor will always have shape
The paths_to_tensor function takes a numpy array of string-valued image paths as input and returns a 4D tensor with shape
Here, nb_samples is the number of samples, or number of images, in the supplied array of image paths. It is best to think of nb_samples as the number of 3D tensors (where each 3D tensor corresponds to a different image) in your dataset!
from keras.preprocessing import image
from tqdm import tqdm
def path_to_tensor(img_path):
# loads RGB image as PIL.Image.Image type
img = image.load_img(img_path, target_size=(224, 224))
# convert PIL.Image.Image type to 3D tensor with shape (224, 224, 3)
x = image.img_to_array(img)
# convert 3D tensor to 4D tensor with shape (1, 224, 224, 3) and return 4D tensor
return np.expand_dims(x, axis=0)
def paths_to_tensor(img_paths):
list_of_tensors = [path_to_tensor(img_path) for img_path in tqdm(img_paths)]
return np.vstack(list_of_tensors)
Making Predictions with ResNet-50¶
Getting the 4D tensor ready for ResNet-50, and for any other pre-trained model in Keras, requires some additional processing. First, the RGB image is converted to BGR by reordering the channels. All pre-trained models have the additional normalization step that the mean pixel (expressed in RGB as $[103.939, 116.779, 123.68]$ and calculated from all pixels in all images in ImageNet) must be subtracted from every pixel in each image. This is implemented in the imported function preprocess_input. If you're curious, you can check the code for preprocess_input here.
Now that we have a way to format our image for supplying to ResNet-50, we are now ready to use the model to extract the predictions. This is accomplished with the predict method, which returns an array whose $i$-th entry is the model's predicted probability that the image belongs to the $i$-th ImageNet category. This is implemented in the ResNet50_predict_labels function below.
By taking the argmax of the predicted probability vector, we obtain an integer corresponding to the model's predicted object class, which we can identify with an object category through the use of this dictionary.
from keras.applications.resnet50 import preprocess_input, decode_predictions
def ResNet50_predict_labels(img_path):
# returns prediction vector for image located at img_path
img = path_to_tensor(img_path)
img = preprocess_input(path_to_tensor(img_path))
return np.argmax(ResNet50_model.predict(img))
Write a Dog Detector¶
While looking at the dictionary, you will notice that the categories corresponding to dogs appear in an uninterrupted sequence and correspond to dictionary keys 151-268, inclusive, to include all categories from 'Chihuahua' to 'Mexican hairless'. Thus, in order to check to see if an image is predicted to contain a dog by the pre-trained ResNet-50 model, we need only check if the ResNet50_predict_labels function above returns a value between 151 and 268 (inclusive).
We use these ideas to complete the dog_detector function below, which returns True if a dog is detected in an image (and False if not).
### returns "True" if a dog is detected in the image stored at img_path
def dog_detector(img_path):
prediction = ResNet50_predict_labels(img_path)
return ((prediction <= 268) & (prediction >= 151))
(IMPLEMENTATION) Assess the Dog Detector¶
Question 3: Use the code cell below to test the performance of your dog_detector function.
- What percentage of the images in
human_files_shorthave a detected dog? - What percentage of the images in
dog_files_shorthave a detected dog?
Answer: From the results from our code cell below the following results are found.
- Dogs detected in 0 of the human_files_short 0.00%
- Dogs detected in 100 of the dog_files_short 100.00%
When run, our dog_detector finds no dogs in the human_files_short list, and reports 100 files with dogs detected in the dog_files_short list. Unless there is a dog actually in the human_files_short images, the match looks perfect.
### TODO: Test the performance of the dog_detector function
### on the images in human_files_short and dog_files_short.
counter = 0
for human_file in human_files_short:
counter = counter + dog_detector(human_file)
print ('Dogs detected in',counter, 'of the human_files_short', '{:0.2f}%'.format((counter/100)*100))
counter = 0
for dog_file in dog_files_short:
counter = counter + dog_detector(dog_file)
print ('Dogs detected in',counter, 'of the dog_files_short', '{:0.2f}%'.format((counter/100)*100))
Step 3: Create a CNN to Classify Dog Breeds (from Scratch)¶
Now that we have functions for detecting humans and dogs in images, we need a way to predict breed from images. In this step, you will create a CNN that classifies dog breeds. You must create your CNN from scratch (so, you can't use transfer learning yet!), and you must attain a test accuracy of at least 1%. In Step 5 of this notebook, you will have the opportunity to use transfer learning to create a CNN that attains greatly improved accuracy.
Be careful with adding too many trainable layers! More parameters means longer training, which means you are more likely to need a GPU to accelerate the training process. Thankfully, Keras provides a handy estimate of the time that each epoch is likely to take; you can extrapolate this estimate to figure out how long it will take for your algorithm to train.
We mention that the task of assigning breed to dogs from images is considered exceptionally challenging. To see why, consider that even a human would have great difficulty in distinguishing between a Brittany and a Welsh Springer Spaniel.
| Brittany | Welsh Springer Spaniel |
|---|---|
 |
 |
It is not difficult to find other dog breed pairs with minimal inter-class variation (for instance, Curly-Coated Retrievers and American Water Spaniels).
| Curly-Coated Retriever | American Water Spaniel |
|---|---|
 |
 |
Likewise, recall that labradors come in yellow, chocolate, and black. Your vision-based algorithm will have to conquer this high intra-class variation to determine how to classify all of these different shades as the same breed.
| Yellow Labrador | Chocolate Labrador | Black Labrador |
|---|---|---|
 |
 |
 |
We also mention that random chance presents an exceptionally low bar: setting aside the fact that the classes are slightly imabalanced, a random guess will provide a correct answer roughly 1 in 133 times, which corresponds to an accuracy of less than 1%.
Remember that the practice is far ahead of the theory in deep learning. Experiment with many different architectures, and trust your intuition. And, of course, have fun!
Pre-process the Data¶
We rescale the images by dividing every pixel in every image by 255.
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True
# pre-process the data for Keras
train_tensors = paths_to_tensor(train_files).astype('float32')/255
valid_tensors = paths_to_tensor(valid_files).astype('float32')/255
test_tensors = paths_to_tensor(test_files).astype('float32')/255
(IMPLEMENTATION) Model Architecture¶
Create a CNN to classify dog breed. At the end of your code cell block, summarize the layers of your model by executing the line:
model.summary()
We have imported some Python modules to get you started, but feel free to import as many modules as you need. If you end up getting stuck, here's a hint that specifies a model that trains relatively fast on CPU and attains >1% test accuracy in 5 epochs:
Question 4: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. If you chose to use the hinted architecture above, describe why you think that CNN architecture should work well for the image classification task.
Answer: My initial CNN architecture was to follow a similar style to Microsoft's ResNet and Oxford Univertities' VGG. That was to apply the same size filters in pairs repeatedly prior to reducing the parameters with pooling. Following this the plan was to add more than one dense layer at the output.
Initially and due to compute limitations I did this with two lots of 16 filters then a pool size of 2, followed by two lots of filters at 32 followed by a pool of 2. 16|16||2||32|32||2||
The dense layer I tried with a depth of one with the 133 outputs, this I found could be improved significantly by adding an additional dense layer of 500 features (with dropout), though due to its size the parameter size did increase significantly in size to over 100 million. halving and adding another dense layer would not be feasible.
I believe the volume of parameters at that point was too high. I then reverted back to something more simplistic. I removed the duplication of the convolution layers but maintained the dense layer of 500. This provided a parameter size of 50 million. By adding another convolutional layer with max pooling between this increases the filters used in detection and reduced total parameters to 25 Million. Though high, performance was reasonable for small to medium use. Additionally I did try reducing the 500 dense layer to a smaller value but this proved optimal and the additional compute delay was acceptable.
from keras.layers import Conv2D, MaxPooling2D, GlobalAveragePooling2D
from keras.layers import Dropout, Flatten, Dense
from keras.models import Sequential
model = Sequential()
model.add(Conv2D(filters=16, kernel_size=2, padding='same', activation='relu',
input_shape=(train_tensors[-1].shape)))
model.add(MaxPooling2D(pool_size=2))
model.add(Conv2D(filters=32, kernel_size=2, padding='same', activation='relu'))
model.add(MaxPooling2D(pool_size=2))
model.add(Conv2D(filters=64, kernel_size=2, padding='same', activation='relu'))
model.add(MaxPooling2D(pool_size=2))
model.add(Flatten())
model.add(Dense(500, activation='relu'))
model.add(Dropout(0.4))
model.add(Dense(133, activation='softmax'))
### TODO: Define your architecture.
model.summary()
Compile the Model¶
model.compile(optimizer='rmsprop', loss='categorical_crossentropy', metrics=['accuracy'])
(IMPLEMENTATION) Train the Model¶
Train your model in the code cell below. Use model checkpointing to save the model that attains the best validation loss.
You are welcome to augment the training data, but this is not a requirement.
from keras.callbacks import ModelCheckpoint
### TODO: specify the number of epochs that you would like to use to train the model.
epochs = 5
### Do NOT modify the code below this line.
checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.from_scratch.hdf5',
verbose=1, save_best_only=True)
model.fit(train_tensors, train_targets,
validation_data=(valid_tensors, valid_targets),
epochs=epochs, batch_size=20, callbacks=[checkpointer], verbose=1)
Load the Model with the Best Validation Loss¶
model.load_weights('saved_models/weights.best.from_scratch.hdf5')
Test the Model¶
Try out your model on the test dataset of dog images. Ensure that your test accuracy is greater than 1%.
# get index of predicted dog breed for each image in test set
dog_breed_predictions = [np.argmax(model.predict(np.expand_dims(tensor, axis=0))) for tensor in test_tensors]
# display(dog_breed_predictions)
# report test accuracy
test_accuracy = 100*np.sum(np.array(dog_breed_predictions)==np.argmax(test_targets, axis=1))/len(dog_breed_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
bottleneck_features = np.load('/data/bottleneck_features/DogVGG16Data.npz')
train_VGG16 = bottleneck_features['train']
valid_VGG16 = bottleneck_features['valid']
test_VGG16 = bottleneck_features['test']
Model Architecture¶
The model uses the the pre-trained VGG-16 model as a fixed feature extractor, where the last convolutional output of VGG-16 is fed as input to our model. We only add a global average pooling layer and a fully connected layer, where the latter contains one node for each dog category and is equipped with a softmax.
VGG16_model = Sequential()
VGG16_model.add(GlobalAveragePooling2D(input_shape=train_VGG16.shape[1:]))
VGG16_model.add(Dense(133, activation='softmax'))
VGG16_model.summary()
Compile the Model¶
VGG16_model.compile(loss='categorical_crossentropy', optimizer='rmsprop', metrics=['accuracy'])
Train the Model¶
checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.VGG16.hdf5',
verbose=1, save_best_only=True)
VGG16_model.fit(train_VGG16, train_targets,
validation_data=(valid_VGG16, valid_targets),
epochs=20, batch_size=20, callbacks=[checkpointer], verbose=1)
Load the Model with the Best Validation Loss¶
VGG16_model.load_weights('saved_models/weights.best.VGG16.hdf5')
Test the Model¶
Now, we can use the CNN to test how well it identifies breed within our test dataset of dog images. We print the test accuracy below.
# get index of predicted dog breed for each image in test set
VGG16_predictions = [np.argmax(VGG16_model.predict(np.expand_dims(feature, axis=0))) for feature in test_VGG16]
# report test accuracy
test_accuracy = 100*np.sum(np.array(VGG16_predictions)==np.argmax(test_targets, axis=1))/len(VGG16_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Predict Dog Breed with the Model¶
from extract_bottleneck_features import *
def VGG16_predict_breed(img_path):
# extract bottleneck features
bottleneck_feature = extract_VGG16(path_to_tensor(img_path))
# obtain predicted vector
predicted_vector = VGG16_model.predict(bottleneck_feature)
# return dog breed that is predicted by the model
return dog_names[np.argmax(predicted_vector)]
Step 5: Create a CNN to Classify Dog Breeds (using Transfer Learning)¶
You will now use transfer learning to create a CNN that can identify dog breed from images. Your CNN must attain at least 60% accuracy on the test set.
In Step 4, we used transfer learning to create a CNN using VGG-16 bottleneck features. In this section, you must use the bottleneck features from a different pre-trained model. To make things easier for you, we have pre-computed the features for all of the networks that are currently available in Keras. These are already in the workspace, at /data/bottleneck_features. If you wish to download them on a different machine, they can be found at:
- VGG-19 bottleneck features
- ResNet-50 bottleneck features
- Inception bottleneck features
- Xception bottleneck features
The files are encoded as such:
Dog{network}Data.npz
where {network}, in the above filename, can be one of VGG19, Resnet50, InceptionV3, or Xception.
The above architectures are downloaded and stored for you in the /data/bottleneck_features/ folder.
This means the following will be in the /data/bottleneck_features/ folder:
DogVGG19Data.npz
DogResnet50Data.npz
DogInceptionV3Data.npz
DogXceptionData.npz
(IMPLEMENTATION) Obtain Bottleneck Features¶
In the code block below, extract the bottleneck features corresponding to the train, test, and validation sets by running the following:
bottleneck_features = np.load('/data/bottleneck_features/Dog{network}Data.npz')
train_{network} = bottleneck_features['train']
valid_{network} = bottleneck_features['valid']
test_{network} = bottleneck_features['test']### TODO: Obtain bottleneck features from another pre-trained CNN.
bottleneck_features = np.load('/data/bottleneck_features/DogResnet50Data.npz')
train_Resnet50 = bottleneck_features['train']
valid_Resnet50 = bottleneck_features['valid']
test_Resnet50 = bottleneck_features['test']
(IMPLEMENTATION) Model Architecture¶
Create a CNN to classify dog breed. At the end of your code cell block, summarize the layers of your model by executing the line:
<your model's name>.summary()
Question 5: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. Describe why you think the architecture is suitable for the current problem.
Answer: The model follows what I initially wanted to use in the manual CNN creation where I wanted to use a method similar to ResNet. By now using Transfer Learning this is now possible. With the output layer of ResNet removed we're using the GlobalAveragePooling to reduce the dimensionality. From here we're again having two dense layers with 500 features prior to the final output of 133 which classifies the dog. The number of parameters is significantly reduced to 1 million which is a great improvement over the manual CNN.
By having just one dense layer of 133 to classify the dog breed, this affected the accuracy. Adding multiple dense layers improved the accuracy. The final model choice with one additional dense layer of 500 features to the final 133 output layer I believe is an acceptable balance between compute time and accuracy.
### TODO: Define your architecture.
Resnet50_model = Sequential()
Resnet50_model.add(GlobalAveragePooling2D(input_shape=train_Resnet50.shape[1:]))
Resnet50_model.add(Dense(500, activation='relu'))
Resnet50_model.add(Dense(133, activation='softmax'))
Resnet50_model.summary()
(IMPLEMENTATION) Compile the Model¶
### TODO: Compile the model.
Resnet50_model.compile(loss='categorical_crossentropy', optimizer='rmsprop', metrics=['accuracy'])
(IMPLEMENTATION) Train the Model¶
Train your model in the code cell below. Use model checkpointing to save the model that attains the best validation loss.
You are welcome to augment the training data, but this is not a requirement.
### TODO: Train the model.
checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.Resnet50.hdf5',
verbose=1, save_best_only=True)
Resnet50_model.fit(train_Resnet50, train_targets,
validation_data=(valid_Resnet50, valid_targets),
epochs=5, batch_size=50, callbacks=[checkpointer], verbose=1)
(IMPLEMENTATION) Load the Model with the Best Validation Loss¶
### TODO: Load the model weights with the best validation loss.
Resnet50_model.load_weights('saved_models/weights.best.Resnet50.hdf5')
(IMPLEMENTATION) Test the Model¶
Try out your model on the test dataset of dog images. Ensure that your test accuracy is greater than 60%.
### TODO: Calculate classification accuracy on the test dataset.
# get index of predicted dog breed for each image in test set
Resnet50_predictions = [np.argmax(Resnet50_model.predict(np.expand_dims(feature, axis=0))) for feature in test_Resnet50]
# report test accuracy
test_accuracy = 100*np.sum(np.array(Resnet50_predictions)==np.argmax(test_targets, axis=1))/len(Resnet50_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
(IMPLEMENTATION) Predict Dog Breed with the Model¶
Write a function that takes an image path as input and returns the dog breed (Affenpinscher, Afghan_hound, etc) that is predicted by your model.
Similar to the analogous function in Step 5, your function should have three steps:
- Extract the bottleneck features corresponding to the chosen CNN model.
- Supply the bottleneck features as input to the model to return the predicted vector. Note that the argmax of this prediction vector gives the index of the predicted dog breed.
- Use the
dog_namesarray defined in Step 0 of this notebook to return the corresponding breed.
The functions to extract the bottleneck features can be found in extract_bottleneck_features.py, and they have been imported in an earlier code cell. To obtain the bottleneck features corresponding to your chosen CNN architecture, you need to use the function
extract_{network}
where {network}, in the above filename, should be one of VGG19, Resnet50, InceptionV3, or Xception.
### TODO: Write a function that takes a path to an image as input
### and returns the dog breed that is predicted by the model.
def Resnet50_predict_breed(img_path):
# extract bottleneck features
bottleneck_feature = extract_Resnet50(path_to_tensor(img_path))
# obtain predicted vector
predicted_vector = Resnet50_model.predict(bottleneck_feature)
# return dog breed that is predicted by the model
return (dog_names[np.argmax(predicted_vector)])
Step 6: Write your Algorithm¶
Write an algorithm that accepts a file path to an image and first determines whether the image contains a human, dog, or neither. Then,
- if a dog is detected in the image, return the predicted breed.
- if a human is detected in the image, return the resembling dog breed.
- if neither is detected in the image, provide output that indicates an error.
You are welcome to write your own functions for detecting humans and dogs in images, but feel free to use the face_detector and dog_detector functions developed above. You are required to use your CNN from Step 5 to predict dog breed.
Some sample output for our algorithm is provided below, but feel free to design your own user experience!
(IMPLEMENTATION) Write your Algorithm¶
### TODO: Write your algorithm.
### Feel free to use as many code cells as needed.
def Dog_breed_detector(img_path):
#is the image of a human or a dog?
if face_detector(img_path) == True and dog_detector(img_path) == False:
image_type = 'Hello human!'
elif face_detector(img_path) == False and dog_detector(img_path) == True:
image_type = 'Hello dog!'
else:
#Either dogs and humans in there or none at all
#both ways we'd need to throw an error
image_type = None
return image_type
Step 7: Test Your Algorithm¶
In this section, you will take your new algorithm for a spin! What kind of dog does the algorithm think that you look like? If you have a dog, does it predict your dog's breed accurately? If you have a cat, does it mistakenly think that your cat is a dog?
(IMPLEMENTATION) Test Your Algorithm on Sample Images!¶
Test your algorithm at least six images on your computer. Feel free to use any images you like. Use at least two human and two dog images.
Question 6: Is the output better than you expected :) ? Or worse :( ? Provide at least three possible points of improvement for your algorithm.
Answer: The results overall perform well. I placed a check that if a human or dog was not detected then it would provide a 'not sure' message. Similarly if an image was detected as having both a human and dog in there (such as we saw in the dog_files_sample) again it would display the same error. This could be an area for improvement where multiple images are seperated and each are uniquely identified. for example multiple humans, dogs or a mix are uniquely analysed.
The dog classifier only detects pedigree dogs i.e. those which are produced from a single breed type. If a dog is a cross-breed for example half English Cocker Spaniel and half Alsatian it may be possible to report on this. Since we're just reporting back the highest result from the 133 returns, if there is a close difference between the top 2 results that could help identify cross-breeds by ratio.
As we discussed previously, it could be possible to improve the human face detection by bearing in mind pictures where faces are not fully visible, or a picture of a profile face where half the features are missing.
I was curious to see if other images would be detected as humans or dogs by using images of neither. In these instances the detection looked to perform well being unable to identify a picture of a bee. I also tried to add ears and a dog nose superimposed on a human face which it was unable to identify. Similarly there were other features missing in the picture which would not identify the picture as a dog. I would suggest in this instance some features which identify a human (or dog) such as the nose are of significance. Removing the cartoon nose from the image then reported that the image was of a human with no other changes.
## TODO: Execute your algorithm from Step 6 on
## at least 6 images on your computer.
## Feel free to use as many code cells as needed.
import glob
def is_this_a_dog(imgs):
i = 1
fig = plt.figure(figsize=(50,50))
for img in imgs:
detector_type = Dog_breed_detector(img)
if detector_type:
xlabel_value = "You look like a..\n%s" %Resnet50_predict_breed(img)[7:]
display_image = cv2.imread(img)
cv_rgb = cv2.cvtColor(display_image, cv2.COLOR_BGR2RGB)
ax = fig.add_subplot(4, 3, i, xticks=[], yticks=[], title=detector_type)
ax.title.set_fontsize('32')
ax.set_xlabel(xlabel_value, fontsize='32')
else:
#Didn't know if it was a Human or a Dog
xlabel_value = "You look like a..\nsorry, I'm not sure!"
display_image = cv2.imread(img)
cv_rgb = cv2.cvtColor(display_image, cv2.COLOR_BGR2RGB)
ax = fig.add_subplot(4, 3, i, xticks=[], yticks=[], title=detector_type)
ax.title.set_fontsize(32)
ax.set_xlabel(xlabel_value, fontsize=32)
ax.imshow(cv_rgb)
i = i + 1
myfiles = glob.glob('images/samples/*.jpg')
is_this_a_dog(myfiles)
Please download your notebook to submit¶
In order to submit, please do the following:
- Download an HTML version of the notebook to your computer using 'File: Download as...'
- Click on the orange Jupyter circle on the top left of the workspace.
- Navigate into the dog-project folder to ensure that you are using the provided dog_images, lfw, and bottleneck_features folders; this means that those folders will not appear in the dog-project folder. If they do appear because you downloaded them, delete them.
- While in the dog-project folder, upload the HTML version of this notebook you just downloaded. The upload button is on the top right.
- Navigate back to the home folder by clicking on the two dots next to the folder icon, and then open up a terminal under the 'new' tab on the top right
- Zip the dog-project folder with the following command in the terminal:
zip -r dog-project.zip dog-project - Download the zip file by clicking on the square next to it and selecting 'download'. This will be the zip file you turn in on the next node after this workspace!